NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              Mac Printing Queue Removal
DOCUMENT ID:        TID000179
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         MACDEL.EXE

NOVELL PRODUCT and VERSION:
NetWare for Macintosh Pre 2.2
NetWare for Macintosh 2.2

ABSTRACT:
This file contains the steps to remove all files when printing with the MAC
VAP's setup through MACSETUP.  The file also contains the steps to start
over from scratch.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  MACDEL.EXE

Files Included     Size     Date        Time

  MACDEL.TXT          (This File)
 MAC_DEL.EXE      12219    4-03-90      9:22a


The following steps are used to delete Macintosh printing from a NetWare
for Macintosh vap host or target.

For 1.1/2.0 VAPS:

1. Use MACSETUP to delete any APPLETALK print queues that were created with
MACSETUP.

2. In the SYS:SYSTEM directory, type the following command:

   NDIR ATPRINT.SET /SUB  or
   NDIR *.SET /SUB (if queue resides on a target server)

Record the number of the directory found (if any). This is the APPLETALK
print server directory.

(The print server directory under SYS:SYSTEM can also be found from the
Print Server ID in Pconsole)

3. Change directory to the APPLETALK print server directory and delete all
files in it.

4. Remove the APPLETALK print server directory using the following
generalized instructions (may vary from site to site):

CD 0032720D (This APPLETALK print server number will vary)
DEL *.*     (Answer Y to "Are you sure Y/N?")
CD..
RD 0032720D

5. Delete the APSVAP.VAP and AQSVAP.VAP from SYS:SYSTEM.

6. Run MAC_DEL to delete the APPLETALK bindery objects.

7. Run BINDFIX. (DO NOT use 'show dots=on' in SHELL.CFG file from the
workstation where BINDFIX is run, possible volume damage may occur!)

8. Run Macsetup to re-create Macinstosh print services.
--------------------------------------------------------
For 2.2 VAPS

1. At the server console, use the DELETE command to delete any APPLETALK
print queues.

2. Use the same commands (step 2 above) to find and delete the APPLETALK
print server directory in SYS:SYSTEM.

3. Run MAC_DEL to delete the APPLETALK bindery objects.

4. Run BINDFIX. (DO NOT use 'show dots=on' in SHELL.CFG file from the
workstation where BINDFIX is run, possible volume damage may occur!)

5. Run RECONFIG at the server console and answer yes to Add or remove
volumes/LAN adapters.

6. Down the server and reboot, AUTOCFG vap will recreate the APPLETALK
print server directory under SYS:SYSTEM and the APPLETALK bindery objects.

7. Down the server and reboot again. Now use the CREATE, PUBLISH and ATTACH
commands at the server console to configure your server for Macintosh print
services.
ÿ